Ferat Water Technologies

Submersible Pumps (50 Hz)

General
Parts and Materials
Products
General Performance
Other

FDP CAST IRON SUBMERSIBLE PUMP (50 Hz)

Ferat cast iron pump series are designed by Ferat engineers using Computational Fluid Dynamics (CFD) methods. With its modern design, high efficiency and low energy consumption, as well as high quality materials, it ensures the pumps to have long life and high durability. In our company, within wide range of products;

• 6″,7″,8″,9″ and 10″ types,

• From 0 to 300 m³/h capacity range,

• At 50 Hz (2900 rpm ) and 60 Hz (3450 rpm) frequencies and speeds,

• The production of clean water pumps operating at a maximum head of 600 m is made.

All pumps before shipment; they were subjected to the necessary tests according to the definitions of the standards.

In the products; “Superior Technology and Low Energy Consumption” are given importance.

Diffuser

Diffusers made of cast iron, bronze and stainless steel are the parts that allow the water coming from the impeller to pass to the upper impeller and that they are bearing to the impellers.

Stop Ring

It is the part that during the first operation of the pump to prevents the upward movement from damaging the fan group.

Bearings with Sand Channels

All bearings are water-lubricated and have a squared shape enabling sand particles, if any, to leave the pump together with the pumped liquid.

Valve Casing

The valve casing is made of cast iron, bronze and stainless steel in one piece and provides a secure and sturdy connection of the pump to the column group. There is also a non-return check valve inside the pump when it stops.

Coupling

Coupling made of stainless steel is the coupling part which transfers the shaft power of the motor to the pump shaft. It is produced in accordance with NEMA standards.

Suction Case

The suction case made of cast iron, bronze and stainless steel in one piece offers a more durable and reliable structure to the pumps with its superior design.

Strainer

Stainless steel strainer is a piece of suction equipment mounted on the suction chamber to prevent large parts from entering the pump.

Impeller

Impellers made of cast iron, bronze and stainless steel are the parts that convert the power received from the pump shaft into flow energy.

Part Name		Material
1	Valve Casing	CAST IRON (GG20)
2	Stud	AISI 304
3	Nut	AISI 304
4	Valve Bushing	BRONZE ASTM B145 - 4A
5	Valve Spring	AISI 302
6	Valve	CAST IRON (GG20)
7	Valve Seat	RUBBER (NBR)
8	Shaft	AISI 420
9	Diffuser O-ring	RUBBER (NBR)
10	Diffuser	CAST IRON (GG20)
11	Diffuser Bearing	BRONZE ASTM 8145 - 4A
12	Split Cone	AISI 420
13	Impeller	CAST IRON (GG20)
14	Diffuser Bearing with Sand Channels	RUBBER (NBR)
15	Suction Case	CAST IRON (GG20)
16	Coupling	AISI 420
17	Coupling Screw	AISI 304
18	Strainer Screw	AISI 304
19	Cable Guard Screw	AISI 304
20	Cable Guard Tie	AISI 304
21	Cable Guard	AISI 304
22	Strainer	AISI 304
23	Stop Ring	AISI 304
24	Washer for Stop Ring	AISI 304

6"	7"	8"	9"	1O"
FDP 6203	FDP 7420	FDP 8308	FDP 9650	FDP 10655
FDP 6306		FDP 8415		FDP 10865
FDP 6310		FDP 8420		FDP 10875
FDP 6415		FDP 8530
		FDP 8535
Please click for product detail